New
20 views
Like new Autolite manifold heater for the “waffle” style exhaust manifold. Comes with assorted parts for the heater.
New
12 views
This is a tool from the Model A era that was used to remove and replace the drive-in grease fittings (like in the spring shackles). ...
Popular
115 views
Late 1931 Fuel Shutoff Switch that mounts on the right side of the firewall for cars with carburetor with attached sediment bowls. This is an...
Popular
232 views
Engine blocks, water pumps, cyl head, trans gears and a whole lot more - the list goes on to 125 items, some new,old stock. Email...
Popular
170 views
Original Antique K.R. Wilson Engine Stand. Cast Iron No.35 Post. Has new reproduction cast aluminum valve tray. Comes with two original 8 point Knotch plates....
Popular
103 views
Complete set of window moldings for a 1929 - 1931 Ford Model A Briggs Fordor. Set Includes Twelve (12) Pieces:: 1 - Dash Rail...
Popular
101 views
Differential gears for Model A Ford -4:11 Ratio This is an excellent set of rear end gears for a 1928 to 1931 Model A Ford....
Popular
150 views
New main wiring harness with wiring diagram as shown. Buyer pays shipping from 95008.
Popular
245 views
Schrader Universal Tire Pressure Gauge, Patented last in 1922, inscribed with "Lee Tire & Rubber Co." and "Conshohocken, PA. Plating in excellent shape. Untested, but...
Popular
217 views
New set of Fulton Windwing Brackets. Clamp on style, no drilling necessary. Glass is available from parts suppliers. Buyer to pay shipping
Popular
306 views
Vintage (1929) black auto trunk. Made by Julius Harband of San Francisco. This was my Great Uncle George and Aunt Jennie Austin's travel trunk...
Popular
431 views
Two restored generators with refurbished original Ford cutouts. One is 1928-early 1929. The other is a 1930-1931. The armatures were tested for opens, shorts &...
Popular
628 views
Vintage leather trunk, good condition, beautiful. Made in San Francisco California Measurements Depth: 16” Height: 18.5” With: 34.5”
Popular
896 views
This is a Diamond block, manufactured in the late 1930s for use as an industrial engine. It features a counterbalanced crankshaft with inserted main bearings...
Popular
566 views
One is in good shape and the other needs some welding but it is workable and will fit sold by the set only ( will...
Popular
739 views
Pair of 1929 front welled fenders excellent condition $1,000 New 1930-31 left fender undamaged $500 Have others and many parts. Can bring to Turlock